+

1Pcs Ce Goedgekeurd 2P Dc 1000V Spd 20-40kA Dc Piekstroombeveiliging/Dc Overspanningsbeveiliging Voor Solar systeem Bescherming

USD 7.50USD 10.72

1Pcs Ce Goedgekeurd 2P Dc 1000V Spd 20-40kA Dc Piekstroombeveiliging/Dc Overspanningsbeveiliging Voor Solar systeem Bescherming

Description

2P 1000V DC Surge Protector Device 20KA-40KA House Surge Protector Protective Low-voltage Arrester Device

This surge protector mainly used light volt power distribution system of lightning surge protection or other transient overvoltage.Products built for high voltage dc power supply overheating over-current protection function, can provide grade C for photovoltaic (pv) power system transient protection.Products using 35 mm DIN rail installation, module can change independently, easy to install and maintain, with remote communication alarm interface (dry contact), surge protector to facilitate remote monitoring.

Technical parameters

Nominal PV System Voltage

500V/600V

1000V

1200V

MCOV [UCPV]

630Vdc/700v

1170Vdc

1200Vdc

Max System Discharge Current (8/20 µs) [lmax]

40kA

40kA

30kA

Voltage Protection Level [UP]

≤2.5kV

≤4.0kV

≤4.5kV

Voltage Protection Level at 5kA [UP]

≤2.0kV

≤3.5kV

≤4.0kV

Integrated Fuse Breaking Capacity/Interrupting Rating

30kV/1000Vdc

30kV/1000Vdc

30kV/1200Vdc

Technology

Short-Circuit Interruption (SCI) Overcurrent Protection

Operating Temperature Range [TU]

−40℃ to +80℃

Nominal Discharge Current (8/20 µs) [(DC+/DC−)­­> PE] [In]

12.5kA

Response Time [tA]

<25ns

Operating State/Fault Indication

Green (good)/Red(replace)

Conductor Ratings and Cross­Sectional Area:

Minimum

60/70℃ 1.5mm²/14AWG Solid/Flexible

Maximum

60/70℃ 35mm²/2AWG Stranded/25mm²/4AWG Flexible

Mounting

35mm DIN Rail per EN 60715

Enclosure Material

UL 94V0 Thermoplastic

Degree of Protection

IP20

Capacity

3 Modules, DIN 43880

Standards Information:

IEC 61643­11 Type 2,IEC 61643­1 Class II

Product WarrantyProduct Warranty

Five Years**

Remote Contact Signaling

Remote Contact Signaling Type

Changeover Contact

AC Switching Capacity (Volts/Amps)

250V/0.1A

DC Switching Capacity (Volts/Amps)

250V/0.1A; 125V0.2A; 75V/0.5A

Conductor Ratings and Cross-Sectional Area for Remote Contact Signal Terminals

60/75℃ Msx. 1.5mm²/14AWG Solid/Flexible

Ordering Information

Order from Catalog Numbers Above

Certificate

Contact information:

Please contact me if you have any problem

Specification

Brand Name : BLUSUNSOLAR

Certification : CE

Rated voltage: : Un 1000Vdc/Uc 1300Vdc

Contact Position Indication : ON/OFF/TRIP

Current In(KA) : 20A Imax(KA):40A

Model Number : SY-SPD2-1000V

Poles Number : 2P(DC+,DC-,GND)

Origin : Mainland China

Type : Mini

is_customized : Yes

Color : Orange

Up : <=2.8KV

+