Description

AC 220V 4000W/5000W/10000W Speed Controller SCR Voltage Power Regulator LED Dimmer Motor Speed Controller 220 V Power Supply

4000WElectrical parameters:Voltage: AC 220V (180-280V)Maximum power: 4000WVoltage Regulator: AC 0-220VSize: 1.6mm thick high-temperature circuit board long 60x 45x wide high 40mm Knob Diameter 27mm, height 15mmSCR Current: 41 ASCR voltage: 800V

5000WSpecifications:Product Name: 5000W AC Voltage RegulatorDimensions: Length 84.8*Width 70* Height 40mm, without protruding knobs and connectors.Maximum power: 5000W (resistive load instantaneous limit power), should reduce power usage for a long time, it is recommended to use within resistive load 2200W (key parameters, please pay attention)Working voltage: AC 220VAdjust the voltage: AC 0-220V (from high to low can go to 0, from low to high is about 20V)Note that the load must be connected before the voltage is adjusted.SCR is mainly used for resistive loads (electric heating incandescent lamps, etc.), most of the single-phase AC10000W

Note:

This Product has a Black PCB Board and White PCB Board, The Function is the Same, It's the Color of PCB Board Different only, We Will Randomly Send Black or White,Please Note.Specification:1. Light in the measurement of the output voltage and the input voltage is the same,needs to be connected to more than 20 w load can measure the output voltage2. Alternating current (ac), the output is also an alternating current,it is not a direct current (dc)3. The above, said 4000 W, is the point at which work load energy impedance,Inductive load is 1/3 impedance load,load impedance refers to light, heat wire, etc,Inductive load is only series motor, etc.4. The metal housing of electrical equipment,of safety, please contact with the ground