Support for more than DC output voltage when 5V inputModule size: about 25 x 48mm/0.98 x 1.88inch (W x L)Output current: 2 ~ 20mA. (If you want to add the current, pls put insurance under the transformer replaced the 0-ohm resistor, maximum 50mA, but not recommended increased.)When the input voltage is 5 v, the output voltage can be adjusted in 280 ~ 1200 v.When the input voltage is 6 ~ 12v, the output voltage can be adjusted in 400 ~ 1200v.The capacitor can be charged, but the charging speed is a bit slow, please note.Like the power of the output module module, it is not possible for the sensor.Corresponding Product Description: This module is used in security products, stability is quite goodThis module with AC output, output around AC 75 v, but can not be adjustedProduct test model:1. Please refer to the main map, the new output products are generally stable, of course, if you test the output voltage is unstable, you can add a current limiting resistance to the test, usually this problem does not occur.2. When adjusting the recommended output add a resistance rectifier like the following picture.Colour: as shownMaterial: metalPackage Contents:1 x Boost ConverterOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.