Description

YOU CAN ADD ALL ITEMS TO YOUR CART,THEN PLACE ORDER TOGETHER, SO IT WILL COST ONLY ONE  SHIPPING COST ACCORDING TO THE TOTAL WEIGHT, THANKS MUCH】

Available voltages include output 5V, output 9V, output 12V, output 15V, output 24V, etc. Please note and leave a message for customers!

High Efficiency DC-DC Boost Module 3V to 5V Booster Board

The latest mini version, small size, length 15.6MM, width 10.6MM, thickness 5.5MM (the size of the second section of the little finger), the highest efficiency is 92%, high-efficiency chip, input and output all use large-capacity precious metal MLCC multilayer ceramic capacitors (low impedance) Output ripple Small, no interference with sensitive equipment

More than 50 pieces of 5.8 yuan each, more than 100 pieces of 5 yuan each, the following parameters are when the output is 5V, the output is higher than 5V parameters, see the bottom horizontal line

Model: SY-MN-5

Input voltage: 2.5 to 5v output 5V, the input of models with output higher than 5V must be higher than 3V

Output voltage: no-load 5V±0.1V, no-load standby current 0.1ma

Output current: 5ma-1400ma

PCB size: 15.6x10.6x5.5 MM (L, W, H)

Indication: none, in order to pursue the smallest volume, the indicator LED is omitted to reduce power consumption

Weight: 1.1g

The maximum output peak value can reach 1.5A. It is not recommended to use the mini version at full power. In order to reduce the size of the mini version, the heat dissipation area is naturally small. The working current is large and the heat is large, which is not conducive to the service life of the module. The working current should not exceed 0.9A. Conducive to module cooling.

Do not touch the chip part with your hands when the module is powered on. In winter, static electricity from fingers may cause damage to the chip. Touching the voltage divider resistance during operation may cause the output voltage to change and damage the output device.