Description

Dear customer, if you have any questions about the product, or you need other models of the product, you can add my whatsapp: +8618674775070, I will answer your questions immediately, thank you

Super internal spiral acceleration separator, 110mm inlet and outlet suitable for 110 outer diameter PVC water pipe connection and assembly of the central dust collection system in the woodworking room. Cyclone separator is a device that separates dust particles from airflow by using the effect of inertia centrifugal force. The upper part of the main body is cylindrical and the lower part is conical. The dust-containing gas enters tangentially from the air inlet pipe at the upper part of the cylinder, and is constrained by the wall of the vessel to make a downward spiral movement. Under the action of inertial centrifugal force, the particles are thrown towards the wall of the device to be separated from the air flow, and then fall along the wall to the cone-shaped collection bucket. The purified gas spirals from bottom to top near the central axis, and is finally discharged from the top exhaust pipe.         Precautions 1. The cyclone dust collector of our factory is made of high-strength food-grade PP raw materials. The temperature resistance is relatively stable. It can work in an environment below 90 degrees. During operation, high-speed dust inspection can generate static electricity. It can be wound around a plastic casing to discharge static electricity . 2. The general working efficiency of the cyclone dust collector is between 80% -95%. This has a certain relationship with the suction configuration. The larger the dust particles, the higher the collection rate. When installing, the collection barrel and flange interface must be sealed. Collection rate. To improve the dust removal rate, a secondary filter (bag or Hypa filter element) should be added in front of the fan, or a bag can be connected to the fan outlet. 3. The intake air volume of the cyclone dust collector should be much larger than the dust content, and 60-70% of the intake air volume must be ensured, otherwise the phenomenon of dust generation will occur. If there is no air or too little content in the pipeline when the inlet is inserted into the flour bucket, dust will appear, and the fan will also suck out the dust. Specifications of the separator

 

  型号          BZ-50小分离器        BZ-110大分离器

 1.配套风压       0-20kPa             10-30kPa

 2.配套风量       120-250m3/h         800-1200m3/h

 3.配套功率       550-2000w           750-2500w

 4.配套风速       10-28m/s            10-28m/s

 5.除尘率         80-95%              80-95%

 6.除尘粒径         5 μm - 20 mm         5 μm-80mm

 7.出口外径       50mm                110mm

 8.进口外径       50mm                110mm

 9.外包装尺寸     20*18*38cm          37*31*56cm

 10.重量          800g                  2800g

The product price is ex-factory price and can be delivered to China address free of charge