Low Pressure High Quality Atomizing Misting Brass Nozzle Cooling Water Fog Sprayer System For Garden Watering Adjustable Water

Installation steps:

1。 It is recommended to install the atomization system at a height of 2.5m- .

2。 Connect the adapter to the faucet.

3。 Turn on the tap to clean the system for 1 minute to clean the system and remove impurities.

4。 Screw the spray nozzle onto the tee fitting, except for the last nozzle.

5。 Turn on the tap to clean the system for 2 minutes to ensure that the system is completely cleaned.

6。 Turn off the water and install the last nozzle on the connector and use the end plug.

7。 Fix the atomization pipe with the cable tie saddle clamp provided.

8。 Turn on the tap until the spray works and enjoy the cooling atomization system.

9。 When the atomization system is not used for a long time, turn off the nozzle and keep it dry and clean.

Specifications:

The fine atomizing nozzle uses a brass main body with a stainless steel core guide vane embedded inside. The liquid forms a centrifugal vortex in the guide vane and sprays fine hollow fog particles from the spray hole. It can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog. The spray hole of this kind of nozzle is drilled by the American precision drilling machine, with a hole diameter of 0.3mm, which is well made, and the use cost is saved compared with gas humidification

This series of nozzles do not need air assistance, the system device is simple, the spray point is fine, the atomization is sufficient, energy and water conservation, low cost, good effect; The stainless steel spray sheet is treated by advanced forging process and has strong durability. It is the same kind of nozzle

This nozzle can make full use of the pressure of tap water for atomization, and the effect is better when using high-pressure water pump.

[application scope]

1. Wetting and derusting 2. Air humidification 3. Chemical treatment 4. Chemical agent spraying 5. Liquid spraying 6. Tobacco humidification 7. Tablet coating 8. Flue gas evaporative cooling 9. Sterilization 10. Component cooling 11. Fruit wax spraying 12. Ceramic tile glazing 13. Plant humidification 14. Salt spray test 15. Artificial fog 16. Humidification in other places, etc.

Package Included:

1 * 1 set of spray

Notes:

Don't leave 1 star and 2 star feedback without asking for help.

If you have any questions, please contact us. We will try our best to solve any problems and provide you with the best customer service.