Liitokala lii-260 chargerThe product description:

engineer lii-260 instruction for use

a , warning

the 1.1 charger only serve lithium ion battery cylindrical .

1.2 before use , please carefully instruction manual , note rechargeable battery of the recommended charge current , don't recommended above current charge .

1.3 do not use other / ac dc adapter .

1.4 charger charge discharge may fever , noticing don't scald .

1.5 stop , please remove ac power supply .

1.6 can only in normal indoor use .

second , features

2.1 two kinds of charge current adjust ( 500ma / 1000ma ) .

2.2 can various specifications ( 18650/26650 ) battery simultaneously charge .

2.3 every battery display lcd have independent charge parameter

2.4 charger mode , different charge current charge .

2.5 dischareger mode ( first full electric again discharge ) , detect battery capacity .

2.6charger and dischareger two models can be done concurrently .

2.7 each one battery are available at or autocephalous / set charge capacity detection function .

2.8 variety display mode , current ( ma ) / capacity ( mah ) / voltage ( v ) / time ( h ) / resistance ( mr ) .

2.9 30mm with 's / ac dc adapter .

three , keys ( mode ) description

3.1 charger have two buttons , control of scranton , brief convenient to use

3.2 in any case key hold down mode and keep 3 seconds change charger ( charge ) mode or discharege ( capacity detection ) mode , then in 8 seconds tootle again change current , current 8 selected seconds after into gear , in a can light press ( mode ) key , view current ( ma ) / capacity ( mah ) / voltage ( v ) / time ( h ) / resistance ( mr ) .

four , operation mode

4.1 charge mode ( charge mode )

4.1 . 1 when switching-in power supply charger when , charger all lcd screen instant full bright , if batteries not put into will show null , if is bad battery put into also display null .

4.1 . 2 when charger rslite into the battery , charger in 3 seconds about measured out battery resistance , after the system automatic enter the charge current selected mode , screen in & ldquo 500ma rdquo thundered the s 8 seconds flicker in the period can pass key mode choice 500ma or 1000 ma current charge system in 8 seconds after will be your choice lock current charge if in 8 seconds no make a set the so system automatic to 500ma current charge current at this time wont change if you want to change reset battery need .

4.1 . 3 user need advertent rechargeable battery the maximum charge current , if you need fast charge , suggest to use 500ma charge , this is the most safe and for battery also the most favorable

4.1 . 4 charge mode , through mode gently press key can switch to view charge battery power ( mah ) / charge time ( h ) / battery resistance ( mr ) / charge current ( ma ) , 4 types , batterycharge full after , will show full , undermost a row of small word display charge end ( charge end ) .

4.2 discharge mode ( capacity detection mode )

4.2 . 1 discharge mode is battery full , then put the battery discharge and record discharge detection battery thereby coulant capacity , will automatically after the battery full .

4.2 . 2 - - battery put in out battery charger determination resistance after , arbitrary in the state of long mode key press 3 into the second discharge model discharge

into the discharge - - after mode , screen appear & ldquo 500ma rdquo thundered the s 8 seconds flicker in the period can pass key mode choice 500ma or 1000 ma current system in 8 seconds after will be your choice lock current if in this 8 seconds no make a set the then will automatically lock system 500ma current battery charge selected current this time is system battery charge of current

- when battery full after , system automatic to 500ma current battery discharge and record discharge battery power , thereby detection battery capacity , when the screen appear when discharher and , capacity screen model end , of the indemnifiable screen flicker of electricity parameter for battery actual capacity . .

- - capacity detection mode after the end of , charger to 'll before the selected current characteristic again for battery charge , sufficienty until .

five . specific parameters

5.1 : dc input voltage 12v / 1.5a

5.2 lithium battery charge current : 2x ( 4.2v 500ma ) , 2x ( 4.2v 1000ma )

5.3 can charge pool : specification 18650 , 26650 etc

termination 5.4 : way smart voltage monitor

shape : 5.5 measurement 132mm ( long ) * 65mm ( wide ) * 31mm ( high )

joint adapter plug in put into the battery :

1 . display battery internal resistance

2 . charge current 500ma / 1000ma optional

3 . battery voltage

charger : mode

Electrical Parameters:

1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot#4),

1000mA*2, 500mA*3 500mA*4

NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

133mm x 100mm x 35mm (L x W x H)

Weight: approx175g (not including AC cable)

Lii-PL4 Data

The Lii-PL4 is a new 4Slot multifunctional smart battery charger launched by LiitoKala. Low price, while four types of batteries can be applied (Li-ion 4.2V / 4.35V Ni-MH 1.2V Li-Fe 3.6V), and a variety of battery sizes.

Charger technical parameters:

Input power: AC 110-240V 50/60Hz / DC 12V-1A

Output voltage: DC 4.2V for Li-Ion

DC 4.35V for IMR

DC 3.65V for LeFePO4

DC 1.48V for NiMH/NI-Cd

Output current: Li-Ion/IMR/LiFePO4 2000mA*1 (fourth channel only),

1000mA*2,

500mA*3

500mA*4

NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4

Constant current, constant voltage charge, cut-off current: <;100m A;

External power standby current: <;15.0m A;

Compatible battery types and models

Li-ion / IMR/LiFePO4: 26650,21700,18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440

NiMH/Cd: AA, AAA, SC, C

Sixth, charger size:

133mm x 100mm x 35mm (length / width / height)

Weight: 175g (including AC power cord)

Lii-500S Features

1. New touch control function;

2. Four optional charging currents: 500mA*4/700mA*4/1000mA *4/2000mA*2;

3. Two discharge currents: 250mA*4/500mA*4;

4. It can charge different batteries of different specifications (18650/26650....../AA/AAA);

5. This product uses a separate LCD display, charge and discharge mode (MODE). Voltage (V).

Current (mA). Time (h). Capacity (mAh) parameters, at a glance;

6. CHARGE, DISCHARGE and TEST modes can work simultaneously; independently set

charge/discharge capacity detection/normal capacity detection function;

7. A variety of protection functions: overcharge and over discharge, short circuit, temperature,

0V voltage activation function, (-V & 0V 165V22V noncharging function intelligent identification

of bad battery and reverse battery detection protection;

8. With standard 5V/1000 mA USB output function (only valid when AC power is connected);

Lii-500S Parameters

Input voltage: DC 12V/3.0A

Output voltage:DC 4.2V / DC 1.48V

Output current

Lithium battery charging current: 500mA*4 /700mA*4/1000mA *4 2000mA *2

NiMH battery charging current: 500mA*4/700mA*4 /1000mA*4

Rechargeable battery specifications: 26650,21700,18650,18350, 20650,14500, AA, AAA, etc.

Discharge current: 250mA / 500mA

USB output: 5V---1000mA

Termination method: intelligent voltage monitoring

Dimensions: 162mm (length) * 100mm (width) * 36mm (height).

Order description

Lii-500S and adapter:Lii-500S charger + 12V/3A adapter + manual

Lii-500S Full: Lii-500S charger + 12V/3A adapter + 12V Car Cable + manual

Note: The results of the Lii-500S charger test are for reference only and do not make any professional proof.

Product Image:

User Manual Lii-S6

Cautions:

This charger can charge all cylindrical rechargeable batteries 3.7V Li-Ion , 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

If DC input, only 12V 3A is recommended

Mind heating while charging

Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

For indoor use only

7. The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions:

1. Multi-power input: 12V 3A adapter(selective), four independent charging and micro computer management system.

2. Charge current intelligent auto-set of total three levels: 500mA /700mA /1000mA/2000mA),2000mA is fixed only for slot#1/3/6.

3. Multi-functional LED charging indicators: for charging progress: 25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR) and for charging current: 0.5A/1A/2A

4. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)

5. Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)

6. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7. Charging at constant voltage and current

Button and LED :

1. Button of Mode: While power supply is connected, 1) Short click the mode button to change the battery type. It will start to charge 9 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries; 2) During charging process, short click the mode button to display battery type.

Note: Battery type can be only selective before charging starts.

2. LED: While power supply connected, all LEDS light up immediately 1) If no battery is inserted, the 500mAh LED (one of the three current display LEDS ) will keep on and others will be off. 2) When battery is inserted and detected, 4 LED charging indicator for the channel will be on among which 3.7V battery type LED keeps flashing indicating to set the battery type, if no operation in 5 seconds, it begins by automatic detection(Li-Ion 3.7V or NIMH) then four LED indicators will display the charging status. 3) During charging, short click the Mode button to show the battery type within 5 seconds; 4) If no power supply is connected, inserting a battery, it can quick shows the remaining charger volume of the battery.

Electrical Parameters:

Input : DC 12V 3A(selective);

Output voltage: DC 4.2V for Li-Ion 3.70V

DC 4.35V for Li-Ion 3.85V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

Output current: Li-Ion/IMR/LiFePO4 2000mA*3(only for slot#1/3/6),

1000mA*6/700mA*6 /500mA*6

NiMH/NiCd: 500mA

Constant voltage, cut-off current: less than 100mA;

Standby current: less than 15mA.

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight:

157.0mm× 149.0mm×36.5mm (L x W x H)

Order list:

1. Lii402 and 5V 2A shipping list:Lii-402 charger +5V 2A Charger +2A USB cable +manual

2. Lii202 and 5V 2A shipping list:Lii-202 charger + 5V 2A Charger+2A USB cable + manual

Lii-402 specifications:

DC 5 V / 2 A input power

4-bay independent ports

LED mode display

4 charging currents (500, 700, 1000, 2000 mAh)

Support for different battery sizes

Automatic identification of battery type (Li-ion 3.7 / 3.8 V, Ni-Mh 1.2 V and Li-Fe 3.2 V)

Overcharge protection. Positive and negative reverse connection protection. Overheat protection. NiMH battery negative voltage detection (-dtv).

Battery fault detection

5 V 1000 mAh USB output discharge

For NiMH / CD AAA / Micro, AA / mignon, c.

Li-Ion 26650, 22650, 21700,18650,18490, 18500,

17500, 17355, 16340 (RCR123), 14,500, 10440

Shipping list:Lii-402 charger +5V 2A charger +2A USB cable +manual

Lii-202 Specifications:

DC 5 V / 2 A input power

2-bay independent ports

LED mode display

2 charging currents (500, 1000 mAh)

Support for different battery sizes

Automatic identification of battery type (Li-ion 3.7 / 3.8 V, Ni-Mh 1.2 V and Li-Fe 3.2 V)

Overcharge protection. Positive and negative reverse connection protection. Overheat protection. NiMH battery negative voltage detection (-dtv).

Battery fault detection

5V 1000mAh USB output discharge

For NiMH / CD AAA / Micro, AA / mignon, c.

Li-Ion 26650, 22650, 21700,18650,18490, 18500,

17500, 17355, 16340 (RCR123), 14,500, 10440

Shipping list:Lii-202 charger + 5V 2A charger+2A USB cable + manual