Notice:The delivery is DIY parts, and you need to bring your own soldering iron, solder, double-sided tape or glue gun, and 3 AA batteries.When your DIY is successful, turn on the power switch, put metal with a diameter greater than 2CM in the induction area, and the motor will turn upThe turntable drives the villain to move, but the motor cannot be seen from the outside, it feels like a villain is pushinggrind. The villain ships a piece of acrylic, or you can make your own with peanuts and other items.Put a 1 yuan coin and the villain starts to workCircuit board size: 6.3*5.2CM/2.48*2.04inThe finished product size is about: 10.5CM*8.5CM*11CM/4.13*3.35*4.33inDIY parts delivery list:PCB board*112D07 Vertical toggle switch*11N4007 Diode*19012 triode *18050 triode*29015 triode*1104 ceramic capacitor *2222 ceramic capacitor*22.2K resistor*1220K resistor *1100 ohm blue and white potentiometer*13 AA battery boxes*110CM wire*2M3*8 screws*8M3 nut*8M3*25-30 screw*4M2.5*8 Self-tapping screw*2Resistance random *6Acrylic sheet (1 set of 4 pieces)*1Geared motor *150MM nylon column*3

hello, guys, thank you for visiting my store.We guarantee the quality of our products.If you need more this item ,you can contact us.we will give you our best price. Leave your message!