Description
Features:
1. Balloon With Base:
Can be used repeatedly, can be filled with nitrogen, etc.
2. Tips:
When inflating the aluminum film balloon, it must be slow. You can use a pump to inflate it to 90%, and then blow it with a straw to control the air volume and avoid bursting. If there are 2 layers of aluminum film sticking, be sure to stop inflation, gently pull the 2 layers of aluminum film by hand and then inflate, otherwise it will be easily damaged.
3. Pay Attention To Protection:
Sharp objects, unclean ground, direct sunlight and excessive extrusion can easily damage and burst the sphere.
4. Thermal Expansion And Cold Contraction:
Due to the thermal expansion and contraction of the gas, the aluminum film balloon should be properly inflated in winter or when the temperature drops; in summer or when the temperature rises, the aluminum film balloon should be properly deflated to avoid bursting.
5. How To Inflate Aluminum Film Balloon:
Step 1: Find the sealing position and insert the hand pump (or straw). Step 2: Slowly inflate and pre-fill 90% to avoid explosion. Step 3: Pull out the hand pump (straw), the balloon is automatically sealed.
Specification: Name: Halloween Aluminum Film Balloon Material: aluminum film/aluminum foil Style: Pumpkin/Witch/Dead Tree Process: printing Size: Pumpkin: about 62x111cm/24.40x43.70inch Witch: about 74x122cm/29.13x48.03inch Dead tree: about 87x126cm/34.25x49.60inch Suitable for: Halloween party, courtyard, bedroom living room, shopping malls, hotels, parks and other decorations Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.
Specification
Shape Style : Cartoon Figure
Classification : Ballon Column Base
Material : Aluminium Foil
