Steel radiator bolts on bracket kitk swap K20-K24 engineColor: silverMaterial: Stainless steelapplication:All models: EG, DC2, EK 1992-2000 HONDA CIVICWe have designed a direct bolt-on rad bracket system for your Type K exchange chassis. Relocating your radiator has never been easier! These brackets bolt to the oem upper and lower rad brackets, allowing you to easily mount the radiator on the driver's side of the engine bay. Our universal kit includes 2 different top brackets, one for the EG chassis and one for the EK/DC2 chassis. The kit comes with galvanized hardware. The upper rad bracket is silver powder coated. The lower bracket is stainless steel and uses a high-quality polyurethane gasket. It's really not that easy...As you can see in the picture below, the well nut slides through a drilled hole in your lower radiator bracket. When the mounting bolt is tightened, it mushrooms on the well nut at the back, creating a secure mounting point for your new rad bracket. Simple and effective.Mounting bracket hardware installation1.- Starting with a 1/8 inch drill bit, carefully drill the hole you just marked. After that, you can drill the hole to ½ inch final size.2. Next, insert the well nut into the drilled hole.3. Tighten the M6 boltsPackage Contents:1 set of radiator bracketsOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.