Sunlu Uv Hars Fotopolymeer Hars 405nm 1Kg Hars Lcd Uv-Uithardende Hars Standaard 3D Printer Fotopolymeer Hars Lcd 3D Afdrukken
Parameter
Net Weight: 1 KG
Gross weight/box: 1.19KG
Features
1. Ordinary rigid resin, easy to shape and easy to use;
2. Compatible with most LCD printer models on the market;
3. The best use effect within one year.
Precautions:
1. Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;
2. Do not take it orally, keep away from children, wear gloves before use, avoid direct contact with the skin, and keep indoor ventilation; do not get into the eyes, if accidentally touched, rinse with plenty of water as soon as possible, if you feel unwell, seek medical attention in time;
3. The printed resin model needs to be cleaned with high-concentration alcohol (above 95% is recommended, the higher the better) for about 30 seconds; after cleaning, the alcohol is dried and then cured for the second time, so that the best performance can be obtained;
4. Do not pour the used resin in the chute back into the unused resin, and do not put the resin in the chute for a long time without using it. Pollution of the resin affects the printing effect;
5. Store in a dark place at room temperature. The sun contains ultraviolet rays, which will cure the photosensitive resin; it is recommended to store at an ambient temperature of 15-35°C. The lower the temperature in winter, the higher the resin viscosity;
6. Keep sealed to avoid dust or moisture, which will affect the print quality.
Brand Name : SUNLU
Model Number : Standard UV Resin
Compatibility : LCD
Use for Printer : LCD 3D Printer
N.W : 1KG
Material : Photosensitive Resin
Name : UV Resin
Origin : Mainland China
Form : Liquid
Shelf Life : 1years
Brand Name : SUNLU
Shrinkage : 4-5%
Hardness : 80D±10%
Liquid Density : 1.05-1.25g/cm3
Number of bottom layers : 8-16
Solid Density : 1.195g/cm3
Viscosity(25℃) : 150-350Mpa-s
Bottom Exposure : 60s
Material : Photopolymer Resins
Normal Exposure : 6-8s
Printing thickness : 0.025-0.05mm
Flexure Strength : 61.171±10%
Extension Strength : 49.118±10%Mpa
Elongation at Break : 10.002±10%
Feature 1 : Ordinary rigid resin, easy to shape and easy to use
Feature 2 : Compatible with most LCD printers on the market
Feature 3 : Specially designed for LCD light source to achieve better printing quality.
Feature 4 : an be rapid prototyping. It has been developed to reduce the forming time.
Feature 5 : Appropriate toughness SUNLU Photopolymer Resins have good combination of hardness and toughness, which brings easy removal of model and fine printing details.
Feature 6 : Jewelry, Figure Model, Toys, Dental, Home&Garden, Other
Feature 7 : Protect from light (ultraviolet rays), seal, and store at 15-35°C. The lower the temperature, the higher the viscosity.